CJB-16 magnetic stirrer

1.Single stirring magnetic stirrer 2.Patented newest product ,adopts square 304 ss stainless steel anti-corrosion plate, can

Product features:

1.Single stirring magnetic stirrer

2.Patented newest product ,adopts square 304 ss stainless steel anti-corrosion plate, can place heating mantle or water bath kettle to heat and stir.

3.Using brushless DC motor , with stable performance ,low noise ,long service life , no spark .

4.Stepless speed adjustment,low speed-stable , high speed-strong

usage :

1.Fix the lever in the screw hole at the back and above of the instrument(attention :clockwise and counterclockwise ),then adjust the hight of the cross clip then fasten the reaction bulb with the universal clip. Put the suitable stirring pebble into the container,connect to the 220v power supply,then turn on the power switch.

2.Adjust the “stir”knob clockwisely , make it in a right place according to speed showed to carry out stirring .

3.If the capacity is large or the solution is thick , you can increase the Stirring strength by adjust the knob .

4.If the phenomenon of jumping seed occurs , please turn off the stirring first and start slowly .

technical parameter :

1.Power supply : ~220∨,50Hz

2.Range of speed adjustment : 50-1800 rotation /minute

3.Power : 40W,DC18V

4.Capacity of stirring : ≤1000ml

 5.area of heating plate :160*160mm

6.Working time :continuous

7.Fuse pipe : ø 5×20  15A

attention :

1.Environmental temperature : 0-50°C without any corrosive air .

2.Relative humidity : 35%-85% no condensation

3.Over load is not allowed .

4.Instrument should be earthed well .

5.Long time no use ,please keep it clean and reserve it in a dry and without any corrosion air place .

When there is some change and difference about the specification which is caused by products or products reform related to the specification , pardon that we won’t inform you.

CJB-16 magnetic stirrer